A goal of CS100 is for you to learn to write programs that are not only correct but also understandable. These guidelines should help you toward that goal. We ask that you follow these guidelines when writing programs in this course. They will give you a good basis for developing a style of your own as you become a more experienced programmer.

This document includes guidelines for Java constructs that will be covered later in the semester. Skim these sections now and read them more carefully later when the topics are discussed.

Reasons for following a disciplined programming style
Conventions for names: package names, class names, method names, parameter names, field names, local-variable names, accessor names, constant names
Indentation
Statement-comments
Specification of methods (procedures and functions)
Definitions of variables (field names, parameters, and local variables)
Specifying classes
Acknowledgments

• The major reason for using a disciplined style of programming is that it will save you time whenever you have to read your program or debug it.

Outside this course, making programs readable by others becomes even more important. Most programs live a long time and require "maintenance" --changes to adapt to new and different requirements, upgrades in other software, new hardware, etc. And the author of the program is quite likely not going to be around when the maintenance is required; someone else must read the program and understand it enough to update it successfully. Even the programs you write for yourself should be readable; if not, four weeks after finishing it you will not remember it enough to make changes simply. Thus, simply for your own sake and for the sake of others, it makes sense to develop programming habits that lend themselves to writing readable, understandable, and correct, programs.

Part of these habits concern simple, syntactical measures like indenting program parts properly and using a few conventions for names of variables, methods, etc. The more important part concerns recording enough information in comments for the reader to understand how a program is designed and why. A computer program is the result many design decisions. These decisions --why this variable was introduced, what that function does, etc.-- are often not reflected in the final Java code, which consists of low-level, detailed declarations and statements. However, the higher-level design must be understood if a programmer is to modify the program successfully. Trying to understand decisions that are not recorded in comments in the code is tedious, error-prone, and aggravating --but all too common.

So, it will be to your advantage to instill in yourself some disciplined programming habits, right from the beginning, like

• Write a precise definition (in a comment) of a variable as you write its declaration
• Update the definition of the variable (the comment) when you decide to change its meaning
• Write a precise specification for a method (which says what it does) as you write the method's heading --don't wait until after the method is completely written or until the program is debugged.
• Change the specification for a method whenever you make changes to the body of the method that make the body not fit the specification.

the comments were not of use to you when developing and debugging the program, so you took more time than was necessary.

The comments are harder to write after the program is finished, because it is difficult to remember the meaning of all the variables and methods.

It is quite likely that you won't write the comments --even programmers with the best intentions don't spend much time filling in comments after the fact, because there are too many other interesting things to do.

Return to table of contents

Remember that a name can rarely be used to give a complete, precise definition of the entity it names, and a complete definition should always be given where the entity is defined. The people developing Java programs have developed some conventions for identifiers, which help one readily see what the identifier represents (to some extent). You can see these conventions at work by looking at the classes in java.awt (Abstract Window Toolkit). Below, we state the conventions, with a few additions.

Package names: e.g., AnimalStory

A package is a set of classes that have been grouped together. The name of a package is usually something that identifies its contents. Generally speaking, a package name should begin with a capital letter, and all succeeding words in the name should start with a capital letter.

Since a class represents a set of possible objects, each of which is an instance of the class, a class name should generally be a noun phrase that identifies the possible objects. A class names should begin with a capital letter, and all successive words in the class name should be capitalized.

A method that is a command to do something should be given by a verb phrase that gives some indication of what the method does. (But this name should never be used in place of a precise comment for the method!) A method that implements a function --that returns a value-- should be a phrase that describes the value. For a method that both executes some task and returns a value, use common sense in creating its name.

A class name should begin with a small letter, but all successive words in the class name should be capitalized.

The precise meaning of a parameter, and any restrictions on it, should be given in the comment of the heading of the method. Therefore, particularly if the method is fairly short, it is wise to give parameters short names.

For example, in the two method headings given below, the first is preferable because it is shorter and easier to understand. Moreover, the body of the method of the first method will also be shorter and far easier to understand and manipulate:

// Draw an ellipse that fits exactly within the rectangle whose
// upper left corner is at position (x,y), whose width is w, and
// whose height is h. Use the current color to draw the ellipse.
void drawOval(int x, int y, int w, int h)

// Draw an ellipse that fits exactly within the rectangle whose
// upper left corner is at position (xCoordinate,yCoordinate)
// whose width is width, and whose height is height. Use the
// current color to draw the ellipse.
void drawOval(int xCoordinate,int yCoordinate,
            int width, int height)

A name like theLoopCounter or firstNumber instead of k or x causes clutter. A parameter used as a "flag" should be named for what the flag represents, like noMorePizza, rather than simply flag. Avoid generic names like count and value; instead, describe the items being counted or the value stored in the variable.

A field name, or instance variable as they are sometimes called, contains information that helps describe the "state" of the object in which it occurs. A field name should be a noun phrase that describes the information the field contains. (However, the field still needs a (more) precise comment that describes it.) All words in a field name, except the first, should be capitalized.

A local variable of a method contains information that helps describe the "state" of the method during its execution.. A field name should be a noun phrase that describes the information the field contains. However, the field still needs a (more) precise comment that describes it. All words in a field name, except the first, should be capitalized.

If the body of a method is short, or the places in which a local variable is used is fairly short, then a short, one-or-two letter name can be used for the local variable (see also the conventions for parameter names). A name like theLoopCounter or firstNumberinstead of kor xcauses clutter. If the local variable is used only in a short context, and if it is suitably defined with a comment at its place of declaration, then use the short name. A variable used as a "flag" should be named for what the flag represents, like noMorePizza, rather than simply flag. Avoid generic names like count and value; instead, describe the items being counted or the value stored in the variable.

An accessor method for a field returns the value in the field or stores a value in the field. Two examples will illustrate a convention for naming such accessor methods. To reference a field named textLength, use a method textLength() --the method has the same name and has no parameters-- or use a method setTextLength(). To store a value in the field, use a method setTextLength().

In Java, a constant is simply a field of a class that has been declared final. In order to distinguish a constant from an instance variable or local variable, one could use only capital letters in the names of constants and also separate adjacent words in a constant name with an underscore.

• Substatements of a statement or declaration should be indented.

There are several methods for placing curly braces that delimit statements, none of which is liked by all and all of which are disliked by some. Below, we illustrate three methods, with pros and cons explained to the right:

(0)  if (x < y)        Pro: It is easy to match up braces
     {                 Con: Too many lines are used, and the
         x = y;             number of lines is a scarce resource on the monitor.
     }                 Con: The substatement {x= y; y= 0;} has
     else                   not been indented, because the
     {                      braces are part of the substatement.
        x = 0;              Therefore, the basic rule concerning
        y = y/2;            indentation has not been followed.
     }
(1)  if (x < y) {      Pro: There are no wasted lines.
         x = y;        Pro: The opening brace is out of the way
         y = 0;             and the closing brace indicates

     } else {               nicely the end of a substatement
         x = 0;        Con: It is difficult to match up beginning and end braces.
         y = y/2;
        }
(2)  if (x < y)        Pro: There are no wasted lines.
        {x = y;        Pro: The basic indentation rule is followed.
         y = 0;        Pro: It is easy to match up beginning and
        }                   end braces and easy to see where a
     else                   substatement ends.
        {x = 0 ;       Con: The first statement of a substatement
        y = y/2;            indented differently from the rest.
        }

It doesn't matter which style you use, as long as you use it consistently throughout a program. When working on a program written by someone else, match their style.

Below, we illustrate two ways to place the curly braces surrounding the body of a method. There are others. Choose one and use it consistently within a program.

(0) // Specification of method
    void drawLine(int x1, int y1, int x2, int y2) {
        statement 1;
        statement 2;
    }

(1) // Specification of method
    void drawLine(int x1, int y1, int x2, int y2)
        {statement 1;
        statement 2;
        }

// Truthify x >= y by swapping x and y if needed.
    if (x < y)
       {int tmp = x;
       x = y;
       y = tmp;
       }

Statement comments must be complete. The comment

    // Test for valid input

Placement of statement-comments:
In the example above, and in the following example, the statements specified by a statement comment are indented. In a program with several levels of statement-comments, this indentation is useful in clarifying the structure of a program. In fact, with several levels of statement-comments, even judicious use of blank lines cannot eliminate all ambiguity concerning what statement belongs to what statement-comment. The program fragment given below illustrates this.

// Truthify the definition of t --return false if not possible
    // Eliminate whitespace from the beginning and end of t
        while (t.length() != 0 && isWhitespace(t.charAt(0)))
          t= t.substring(1);

    // If t is empty, print an error message and return
        if (t.length() == 0)
            {...
            return false;
            }

    if (containsCapitals(t))
       {...
       }

    // Store the French translation of t in tFrench
       ...

In this example, note how reliance on the definition of t in the statement-comment "Truthify the definition of t" allows the statement-comment to be short but precise. Of course, a suitable definition for t must appear at its declaration.)

Prefer not to indent for statement-comment?
Many people prefer not to indent substatements of a statement-comment and to rely on blank lines to separate the end of the substatements of a statement-comments. Below, we show the above program fragment in this style. Note the extra comment to help the reader see the end of the substatements for "truthify the definition of t". This style is has its problems. If you decide to use this style, then program in such a way that statement-comments do not appear within statement-comments, so that such awkwardnesses do not arise.

// Truthify the definition of t --return false if not possible
// Eliminate whitespace from the beginning and end of t
while (t.length() != 0 && isWhitespace(t.charAt(0)))
     t= t.substring(1);

// If t is empty, print an error message and return
if (t.length() == 0)
    {...
    return false;
    }

if (containsCapitals(t))
   {...
   }

// (End of Truthify the definition of t)

// Store the French translation of t in tFrench
...

// Print on System.in the most frequently occurring temperature
// in t[0..c-1]. If there is more than one possibility, print
// the least temperature.
void findCommon (Temperature [] t, int c)

// Find most frequent temperature
void findCommon (Temperature [] t, int c)

For a function --i.e. a method that returns a value-- it is often easiest to simply describe the value returned, using the word "yield":

// yield distance between points (x1,y1) and (x2,y2)
    double dist (int x1, int y1, int x2, int y2)

Omit needless words.
Use the active voice.

// Yield "y is in list x"
    boolean isIn(int y, List x)

Important hint: Write the definition of a set of variables when you first conceive of using them, and type the definitions as comments into the program when you type in the declarations of the variables. If you later decide to change the meanings of the variables, change the definitions before you change the statement that use the variables.

// 0 <= i <= currentItem < numberItems and i is the smallest value
// such that item i's price is at most item currentItem's price.

boolean b; // = " user selected menu item File | Quit"
boolean b; // true if the user selected menu item File | Quit;
           // false otherwise

Related variables should be declared and described together. For example, the definition of a table should describe not only the array that holds the data but also the integer variable that contains the number of items currently in the table. In the example below, for utmost clarity tabs are used to line up identifier names and to line up the comments:

final int maxTemp = 150;            // max number of temperature readings.
      int nTemp   = 0;              // Temperature readings are in
                                    // temp[0..nTemp-1], where
double temps = new double[maxTemp]; // 0 <= nTemp < maxTemp

// Temperature readings are in temp[0..nTemp-1], where
// 0 <= nTemp <= maxTemp and maxTemp is the maximum number of
// temperature readings
     final int maxTemp = 150;
     int       nTemp   = 0;
     double    temps   = new double[maxTemp];

// An object of class Auto represents a car.
// Author: John Doe.
// Date of last modification: 25 August 1998
public static class Car;

Return to table of contents